Welcome to GuangYuan · GuangZhiYuan Technology! Contact number: 0769-22780950
中文 | English | Online message | Contact us
-
Consultation hotline
0769-22780950
Tell：0769-22780950
Fax：0769-22780951
E-MAIL：gybp@263.net
Add：No. 2, Xiheng 2nd Road, Bajiaowo Industrial Zone, Wanjiang
District, Dongguan City, Guangdong Province,China.
Common problem
What is the purpose of induction annealing? Which parts are commonly used?
Source： Time：2021-05-11 16:10:11 views：
Sensive annealing is cooled in air after the workpiece reaches an annealing temperature, so it is actually inductive normal fire, but it is used to annealing.
Induction annealing is widely used in steel pipe weld annealing, recrystallization of reflections (such as high pressure tubing portions), and some workpieces required to be partially annealed after carbine (such as motorcycle connecting rods, splice shaft threads, etc.) ).
Sensive annealing is cooled in air after the workpiece reaches an annealing temperature, so it is actually inductive normal fire, but it is used to annealing.
Induction annealing is widely used in steel pipe weld annealing, recrystallization of reflections (such as high pressure tubing portions), and some workpieces required to be partially annealed after carbine (such as motorcycle connecting rods, splice shaft threads, etc.) ). The steel pipe weld is annealing, and the weld is thick, and the non-uniform grain is positively reflecting fine grains; the cold heading workpiece is partially annealed to restore the crystal grains after the cold heading elongate grains returned to a small and uniform grain, so as to avoid the workpiece Damage is damaged by reducing mechanical properties; the local part of the carbon parts such as threaded part is mainly to reduce the hardness of the portion.
Induction annealing is widely used in steel pipe weld annealing, recrystallization of reflections (such as high pressure tubing portions), and some workpieces required to be partially annealed after carbine (such as motorcycle connecting rods, splice shaft threads, etc.) ). The steel pipe weld is annealing, and the weld is thick, and the non-uniform grain is positively reflecting fine grains; the cold heading workpiece is partially annealed to restore the crystal grains after the cold heading elongate grains returned to a small and uniform grain, so as to avoid the workpiece Damage is damaged by reducing mechanical properties; the local part of the carbon parts such as threaded part is mainly to reduce the hardness of the portion.
Related News
More>>- What are the heat treatment equip... 2022-07-21
- Use and maintenance of quenching ... 2021-12-02
- How much is the new induction hea... 2021-09-17
- What are the induction heating eq... 2021-09-13
- What are the components of induct... 2021-08-27
- What aspects are medium frequency... 2021-08-23
- How to choose high frequency indu... 2021-07-30
- Which is a good induction heating... 2021-07-28
- What do you know about induction ... 2021-07-22
- Do you know how to choose an indu... 2021-07-20
- Tell
- 0769-22780950
DongGuan GuangZhiYuan Electronics Technology Co.,Limited | Guang Yuan Technology(HK) Electronics Co.,Limited | DongGuan WanJiang GuangYuan Inverter Electronic Equipment Factory
National consultation hotline：0769-22780950 E-MAIL：gybp@263.net
Add：No. 2, Xiheng 2nd Road, Bajiaowo Industrial Zone, Wanjiang
District, Dongguan City, Guangdong Province,China.
粵ICP備16082297號-1 網站地圖 網站地圖 技術支持：品尚網絡
*本站相關網頁素材及相關資源均來源互聯網，如有侵權請速告知，我們將會在24小時內刪除*
